Hi all,
I've got two Cisco 7206 with a PA-A3 DS3 in each. I did a back to back connection and I can ping or traceroute no problem, but othe traffic does not go. What I'm trying to find out is that, is it possible to do or do I really need an ATM switch or if it is possible, what would be the best way to approach it.
Here's a copy of my config for the PA-A3 cards:
Router1
interface ATM4/0
no ip address
no ip route-cache
no ip mroute-cache
atm clock INTERNAL
atm scrambling cell-payload
atm framing cbitplcp
atm uni-version 3.1
no atm ilmi-keepalive
no atm address-registration
!
interface ATM4/0.1 point-to-point
description VBR-nrt to Paris 2Meg
ip address 20.0.0.1 255.0.0.0
no ip route-cache
pvc 1/100
vbr-nrt 2000 1500 94
!
interface ATM4/0.2 point-to-point
description UBR to Paris 8Meg
ip address 30.0.0.1 255.0.0.0
no ip route-cache
pvc 1/101
ubr 10000
Router2
interface ATM4/0
no ip address
no ip route-cache
no ip mroute-cache
atm scrambling cell-payload
atm framing cbitplcp
atm uni-version 3.1
no atm ilmi-keepalive
no atm address-registration
!
interface ATM4/0.1 point-to-point
description VBT-nrt to Ottawa 2Meg
ip address 20.0.0.2 255.0.0.0
no ip route-cache
pvc 1/100
vbr-nrt 2000 1500 94
!
interface ATM4/0.2 point-to-point
description UBR to Ottawa 8Meg
ip address 30.0.0.2 255.0.0.0
no ip route-cache
pvc 1/101
ubr 10000
I can ping in a setup like this:
PC-router/atm-atm/router-pc
If I try telnet or http or ftp etc... nothing works.