Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ATM PVC status change trap

Hello, I have a cisco 7507 with IOS Version 12.0(8) and ATM interface, this is and example:

interface ATM6/1/0

description ATM Canaima Puerto P4 1 1

no ip address

no ip directed-broadcast

no ip route-cache distributed

load-interval 30

atm sonet stm-1

no atm auto-configuration

atm ilmi-keepalive 10

!

interface ATM6/1/0.16 point-to-point

description CS BUENAVENTURA

bandwidth 448

ip address 192.168.162.233 255.255.255.252

no ip directed-broadcast

pvc BUENAVENTURA 3/16

ubr 505

no ilmi manage

oam-pvc 0

encapsulation aal5snap

I need that the 7507 send a snmp trap with any pvc atm change (like frame-relay traps). I have found a document but i must change the IOS..... this IOS has been very stable and i don´t want to change it. I would know if i can do something in order to receive the ATM traps with my actual IOS.

Thanks..

1 REPLY
Blue

Re: ATM PVC status change trap

No, not in the IOS version that you're using. This fetaure was introduced in 12.2(4)T and later only per:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftpvctrp.htm

86
Views
0
Helpful
1
Replies
CreatePlease to create content