IF LMI type is not configured . Can annexD for instance, auto sense Cisco or annexA ?? (I understand the router will listen on both DLCIs, 0 & 1023 and send 3-requests at specified intervals router will use last LMI type reply .true statement???!?) Are there issues/ concerns with keepalives, events ?? Can you troubleshoot end-end using different LMI types??
Yes as of 11.2 train, if you haven't configured "frame-relay lmi-type ...." router sends and listens all three type LMI messages on both DLCI 0 and 1023. The valid LMI type is the last heard one. For LMI protocol operates between FR DTE and DCE, no concern about using different LMI types on two endpoint FR DTEs. But of course main concern here is the compatibility of the LMI protocols running between local FR DTE - DCE pairs (e.g. router and FR switch).Hope this helps.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...