Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Autoboot: failed, BOOT string is empty

hi i have a 6509sup19IOS ON SLOT0).this 6509 not boot into romon:

have a look to the DIR BOOTFlash:

Router#show bootvar

BOOT variable =

CONFIG_FILE variable does not exist

BOOTLDR variable = bootflash:c6msfc-boot-mz.121-3a.E7

Configuration register is 0x2102

the boot variable=empty.how can add value to the bootvariable?

10xs

2 REPLIES

Re: Autoboot: failed, BOOT string is empty

Hi

Have you configured anything inline with this command

boot system flash in your config pointing the IOS Code ?

Can you check by defining the same ? do save the config before you execute show bootvar command after doing the changes..

regds

New Member

Re: Autoboot: failed, BOOT string is empty

Hi Friend.

10xs for ur help.i hase solved by boot system flash slot0:

3544
Views
4
Helpful
2
Replies