Re: Automated backup configuration of a Catalyst 6509
Thanks for your help, but....
I already checked these links, but it's not very clear for the catalyst 6509...
in fact, if I use the snmpset command with the following OID: .220.127.116.11.18.104.22.168.1.55.xx.xx.xx.xx (xx.xx.xx.xx being the IP address of the TFTP server) it works for the routers, for Catalysts 35xx, and for the MSFC cards, but not for the 6509 itself. I got the followinf error message:
SNMP: variable does not exist
So, I guess I have to use another OID? but which one?
I don't even know if what i want to do is feasible...
If anyone has another idea, it will be more than welcome.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...