Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Backplane utilisation in Cat6500 and 4000

Hi,

I want to know how I can find out backplane utilisation in Cat6500 & 4000 series switches.The output of 'show traffic & sh system' not that much informative.

Regards,

Shibu

  • Other Network Infrastructure Subjects
3 REPLIES
Silver

Re: Backplane utilisation in Cat6500 and 4000

I don't know if you are using IOS or CatOS, but if you are using IOS, at Cat6500 you can try "sh catalyst6000". I don't know is there a similar command at Cat4000.

HTH

New Member

Re: Backplane utilisation in Cat6500 and 4000

We have CatOS. Please let me know which command we have to use.

Regards,

Shibu

Silver

Re: Backplane utilisation in Cat6500 and 4000

I think there's no other commands for such task. Anyway, maybe you might consider trying it by SNMP.

Please, take a look at "How to Get Catalyst Switch Backplane Utilization Using SNMP":

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a96.shtml

HTH

381
Views
0
Helpful
3
Replies
This widget could not be displayed.