backup flash

sun816 · ‎01-23-2002

I cannot backup flash to tftp from c7200.

it imply that device don't ready

kmuthukamu · ‎01-23-2002

Hi,

Before trying to backup falsh to tftp,

* Check tftp server reachability by *ping *

* Check the default gateway [ only ifyou have ] whether it's reachable by *ping . or trace .

For the detail info. please refer

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c/fcprt2/fcimages.htm#35061

Hope this helps..

sun816 · ‎01-24-2002

tftp service does it works,course I can download or upload config to router but I cannot backup the ios with copy flash tft or copy disk:0 tft...and show flash isn't successful.

maybe router boot from pcmcia card,not flash?

(cisco7200vxr)

kmuthukamu · ‎01-24-2002

Hi,

you can backup your IOS image from flash or pcmcia card [ ie. slot0/slot1 ].

As the show flash doesn't show anything , To backup from pcmcia card

try *copy slot0: tftp: or copy slot1: tftp:

Tried in 7200 device the same thing is working.

Attaching the output for backing up the IOS

* from slot0: to tftp

* from flash: to tftp

1. copy slot0: tftp: output

fr7200#show slot0:

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. unknown C350AC84 83E538 27 6852156 Jul 28 1999 10:33:51 c7200-js-mz.120-3c.W5.8.bin

1087116 bytes available (15296884 bytes used)

fr7200#copy slot0: tftp:

Source filename [c7200-boot-mz.111-16.CA]? c7200-js-mz.120-3c.W5.8.bin

Address or name of remote host []? 223.255.254.231

Destination filename [c7200-js-mz.120-3c.W5.8.bin]?

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

6852156 bytes copied in 46.668 secs (148959 bytes/sec)

fr7200#

2. copy flash: tftp: output

fr7200#show flash:

-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. unknown E78E1667 1B567C 23 1660412 Apr 23 1999 07:26:25 c7200-boot-mz.111-16.CA

1087116 bytes available (15296884 bytes used)

fr7200#copy flash: tftp:

Source filename []? c7200-boot-mz.111-16.CA

Address or name of remote host []? 223.255.254.231

Destination filename [c7200-boot-mz.111-16.CA]?

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

1660412 bytes copied in 11.352 secs (150946 bytes/sec)

fr7200#

fr7200#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-JS-M), Version 12.0(4), RELEASE SOFTWARE (fc1)

Compiled Thu 15-Apr-99 06:39 by ccai

Image text-base: 0x60008900, data-base: 0x6108E000

ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)

BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 11.1(16)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

fr7200 uptime is 1 week, 1 day, 54 minutes

System restarted by reload

System image file is "tftp://223.255.254.231/bootimage.fr7200"

cisco 7206 (NPE150) processor with 57344K/8192K bytes of memory.

R4700 processor, Implementation 33, Revision 1.0 (512KB Level 2 Cache)

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

TN3270 Emulation software.

8 Ethernet/IEEE 802.3 interface(s)

3 FastEthernet/IEEE 802.3 interface(s)

125K bytes of non-volatile configuration memory.

1024K bytes of packet SRAM memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x0

fr7200#

Please elaborate where you exactly you have got stuck.

Hope it helps.