Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bandwidth Question

Hello:

Not very familiar with VLANS. I have an HP switch

cross connected to our main office and a sperate floor. At times, the port on this switch is near saturation, 90% utilization. Is there anything I can do as far as linking 2 ports (similiar to multilinking) to increase this connections bandwidth?

Thanks

1 REPLY
Purple

Re: Bandwidth Question

Set up etherchannel so that you can run multiple links run your traffic across . If you have any way to check to see what traffic is running across the links you might want to, I assume this is at least a 100 meg link and it takes quite a bit to bury a 100 meg full duplex link . Etherchannel might be your answer if you have multiple links going to the same floor .

93
Views
0
Helpful
1
Replies