Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Baystack 450-24T Catalyst 3548

How can I get a connection via Gbic between these differents switches. Both switches are not using Vlan but are use like a hub.

Which config should I enter into both catalyst. (full duplex, negociation...)

2 ACCEPTED SOLUTIONS

Accepted Solutions
New Member

Re: Baystack 450-24T Catalyst 3548

Should not put autonegotiate in both sws and no full duplex. Set same speed in both.

MP

New Member

Re: Baystack 450-24T Catalyst 3548

No the gbic on the c3548 isn't 100/1000, it is only 1000 Mbps. So you never will be able to connect the bs450 to the C3524, if you not buy an gbic 1000 Mbps to the bs450.

MP

4 REPLIES
New Member

Re: Baystack 450-24T Catalyst 3548

Should not put autonegotiate in both sws and no full duplex. Set same speed in both.

MP

New Member

Re: Baystack 450-24T Catalyst 3548

I've tried but it still doesn't work. Is there something else to add into the c3548 ?

New Member

Re: Baystack 450-24T Catalyst 3548

Ont the Baystack the line is up but not on the catalyst. The speed on the c3548 is 1000 and 100 on the baystack.

How can I change the speed on the c3548 ?

New Member

Re: Baystack 450-24T Catalyst 3548

No the gbic on the c3548 isn't 100/1000, it is only 1000 Mbps. So you never will be able to connect the bs450 to the C3524, if you not buy an gbic 1000 Mbps to the bs450.

MP

208
Views
0
Helpful
4
Replies
CreatePlease to create content