Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

BGP attributs <match tag> and <set metric >

Hi,

can someone tell me how to use those attributs with cat 6509 (version 12.2 (18) SXD4.

because they don' t run when i try to implement them .

here is an example of the config i try to implement:

route-map metric permit 10

set metric 1

route-map solmetric permit 10

match metric 1

6509-C(config)#router bgp 100

6509-C(config-router)#raddress-family ipv4 vrf vrf2

6509-C(config-router-af)#redistribute connected route-map metric out

6509-C(config)#router bgp 100

6509-C(config-router)#raddress-family ipv4 vrf vrfST

6509-C(config-router-af)#neighbor 210.10.10.2 route-map solmetric in

% "solmetric" used as BGP inbound route-map, metric match not supported %

Thank

1 REPLY
Cisco Employee

Re: BGP attributs <match tag> and <set metric >

match metric is not supported with inbound BGP route-map. Only the following attributes are supported:

match ip address

match as-path

match community

match nlri

match extcommunity

match policy-list

match mpls-label

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
453
Views
0
Helpful
1
Replies
CreatePlease to create content