Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

BGP default route

I configured bgp default-information originate

but it not worked. Is there something more need to be configured?

THKS

4 REPLIES
New Member

Re: BGP default route

If all you want to do is control the redistribution of a protocol or network into BGP, then you are in good shape. Take a look at the BGP Technical Tips page if you are running into problems.

http://www.cisco.com/warp/public/459/18.html

New Member

Re: BGP default route

make sure you have a default route some where on the config on the same router, having the default-information statment is like having a network statment, to work you have to have a specific route.

Re: BGP default route

Default-information originate helps in injecting a default route only if there is default route in the router.

Bronze

Re: BGP default route

default-information originate requires that the router has a default route in the routing table (0.0.0.0 0.0.0.0). If you just want to send a default route to one of your neighbors, you should be using default-originate on the neighbor statemenet, eg:

router bgp 65535

neighbor 1.2.3.4 default-originate

This will send a defualt to your neighbor, which is most likely what your are tying to accomplish....

-- Warren

145
Views
0
Helpful
4
Replies