Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

bgp over two WAN-links between two as´s

hi, we need some ideas and we hope that we could it find here. in our case, we have two haedquarters. this two hq are connected with two wan-links. within every hq runs ospf between the hq´s run bgp. every hq has two local router that runs bgp one router for one wan-connection. between this local router runs natural ibgp and the local router originate networks for ebgp towards the other hq. now we have the case, that some ebgp-routes appears only with one entry on one router while the other router contains the two possible routes in the bgp-tabel on the far ebgp-peer. we checked it and determine that some external-networks are internal synchronized and other not.

the "internal-synchronized" external networks appears in one bgp-table only with one entry and the other bgp-table with two entries. while the "internal-not synchronized" external networks are in both bgp-table with two entries.

thanks in advance

sorry for my bad english :-)

1 REPLY
New Member

Re: bgp over two WAN-links between two as´s

Check all BGP routers can see all EBGP next-hop addresses in their forwarding tables. You could use next-hop-self on the IBGP neighbors statements or advertise the EBGP subnets in your OSPF.

Check that you have NO SYNC under each BGP process.

104
Views
0
Helpful
1
Replies