That is right..., Although penalties can continue to accumulate while the router
is suppressed, the router can not be suppressed beyond the maximum suppress limit . This to insure that a route that has flapped dones of times in a short period doesn't accumulate such a high penalty that it ramains suppressed indefinitely.
Cisco default route-dampening
Penelty 1000 per flap
Suppress limit 2000
Reuse limit 750
Max suppress time 60 min, or 4 times the half-time
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...