Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

big problem, OSPF?ISDN?Router?

2524(U)----ISDN simulator------2525(U)

|

|____________FR Switch________|

IP

2524 s0, 192.168.1.24/24

bri0 192.169.9.2/26

2525 se0, 192.168.1.25/24

bri0, 192.169.9.4/26

2524:

router ospf 20

net 192.168.1.0 0.0.0.255 area 0

net 192.169.9.0 0.0.0.63 area 0

after I press Enter, the 2524 reboot. I tried several times, everytime after I press Enter, the router reboot.

the error messages are:

%Software-forced reload

Buffered messages:

%SYS-7-NV_BLOCK_INIT:Initalized the geometry of nvramPassed

.......ethernet0 up........

.......serial 0 up...

...........

%SYS-6-STACKLOW:Stack for process OSPF Router running low, 0/3000

.......................

...........

Exception:Il

**********************

after that, reboot,

what is the problem like? OSPF? ISDN? Router stack bug?

thanks in advance

2 REPLIES
VIP Purple

Re: big problem, OSPF?ISDN?Router?

Hello,

what is your IOS version ? Might be a bug indeed...

Regards,

GP

Bronze

Re: big problem, OSPF?ISDN?Router?

This is an internal software error. Cisco's documentation reads:

%SYS-6-STACKLOW : Stack for [chars] [chars] running low, [dec]/[dec]

Explanation An internal software error has occurred.

Recommended Action If this message recurs, copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

Here is a link to the documentation.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122sup/122sems/semsvol2/emfsys.htm#112683

Good luck.

Mark

209
Views
0
Helpful
2
Replies
CreatePlease to create content