Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BoD over serial links

hello

if i have 2 routers connected through 2 WAN links: PPP and FR.

is it possible to configure the 2 routers in this manner:

use PPP link for routing , if 80% of PPP link is busy than use FR link in addition to PPP to send the data .

how can we configure it?

thx

3 REPLIES
Silver

Re: BoD over serial links

You could configure the FR link as a backup interface for the PPP link and then use the backup load command to activate the FR link when the PPP link is at 80%:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt6/dcdbaks.htm#xtocid9

New Member

Re: BoD over serial links

do u mean it is possible to back up an interface with an other that is not dial one !

i've thought we could only back up a PPP link with a dial interface.

in my exactly case, i would like to activate a low speed PPP link when 80% of the FR link is full.

Silver

Re: BoD over serial links

No you can also use the backup interface command and backup load commands on normal serial lines not just dial lines.

98
Views
0
Helpful
3
Replies
CreatePlease to create content