Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

Boot load upgrade for 7200VXR

The Cisco 7206 I'm using is running an older version boot load. Where can I download the latest bootcode from and also what is the procedure for upgrading the boot code of this router.

CISCO1#show ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.2(3b), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Fri 26-Oct-01 00:31 by pwade

Image text-base: 0x600089C0, data-base: 0x61362000

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

CISCO1 uptime is 2 weeks, 1 day, 19 hours, 5 minutes

System returned to ROM by power-on

System restarted at 17:39:57 utc Tue Jul 23 2002

System image file is "sup-slot0:/c7200-is-mz.122-3b.bin"

cisco 7206VXR (NPE400) processor (revision A) with 114688K/16384K bytes of memor


Processor board ID 23664918

R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 4096KB L3 Cache

6 slot VXR midplane, Version 2.3

Last reset from power-on

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

8 FastEthernet/IEEE 802.3 interface(s)

16 Serial network interface(s)

8 Channelized E1/PRI port(s)

8 Channelized T1/PRI port(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

4096K bytes of Flash internal SIMM (Sector size 256K).

Configuration register is 0x102


Re: Boot load upgrade for 7200VXR

Boot code can be found in the software center on the CCO ( site.

The following link will take you to the 12.2 Boot images.


Hope this helps,


CreatePlease to create content