Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

boot message

On booting a 1601 router, I get the following

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:04: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 203D2FA 210D33A 210D3BC 20735AA 207373A

00:00:05: %SYS-2-INTSCHED: 'sleep for' at level 4

-Process= "Init", ipl= 4, pid= 2

-Traceback= 2114172 2107FCC 2249F24 23A90D4 210D33A 210D3BC 20735AA 207373A

00:00:05: %SYS-2-INTSCHED: 'sleep for' at level 4

Is this a harware problem? This is the same router that wont forward a DHCP request.

thanks

Wayne

1 REPLY
New Member

Re: boot message

Which IOS version do you use?

There seems to have been a bug in 12.0 and 12.1 that may cause these errors. (BugID:CSCdp75287)

There is another one too, (CSCds11984), but it's marked as duplicate and I dont have permissions to view the original (BugID:CSCds02998)

The error message decoder gives:

1. %SYS-2-INTSCHED: '[chars]' at level [dec]

The scheduler was entered from an interrupt service routine (ISR).

Recommended Action: Copy the error message exactly as it appears on the console or in the system log, include the stack trace, and report it to your Cisco technical support representative.

114
Views
0
Helpful
1
Replies
CreatePlease to create content