Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

boot pb on 7206 VXR

hi all

I've installed a new bootloader PA recognition issue, instruct my router to boot on it and it doesn't work

what did i forget?

note : the boot system cmde is ok,disk0 is supported

here are an extract of conf and error messages from boot sequence.

new-berg2(boot)#sh conf

Using 28397 out of 129016 bytes

!

! Last configuration change at 08:00:31 UTC Mon Oct 14 2002

! NVRAM config last updated at 08:00:37 UTC Mon Oct 14 2002

!

version 12.2

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname new-berg2

!

boot system disk0:c7200-js-mz.122-8.T5.bin

boot bootldr disk0:c7200-kboot-mz.122-8.T5.bin

no logging console

enable secret

--------------------------------------------------------------------------------------------

new-berg2#sh bootvar

BOOT variable = disk0:c7200-js-mz.122-8.T5.bin,12;

CONFIG_FILE variable does not exist

BOOTLDR variable = disk0:c7200-kboot-mz.122-8.T5.bin

Configuration register is 0x2102

------------------------------------------------------------------------------------------------------

new-berg2#

System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 262144 Kbytes of main memory

device does not contain a valid magic number

loadprog: error - on file open

open: failed to find and/or load the bootloader:

"disk0:c7200-kboot-mz.122-8.T5.bin"

loadprog: error - on file open

boot: cannot load "cisco2-C7200"

System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 262144 Kbytes of main memory

device does not contain a valid magic number

loadprog: error - on file open

boot: cannot load "disk0:c7200-js-mz.122-8.T5.bin"

System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 262144 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "disk0:"

boot: cannot determine first file name on device "disk0:"

System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2002 by cisco Systems, Inc.

C7200 platform with 262144 Kbytes of main memory

Self decompressing the image :

############################################################################################################################################################################################################################################################################################################################################################################################################################

[OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-KBOOT-M), Version 12.1(8a)E, EARLY

DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Mon 09-Jul-01 06:20 by hqluong

Image text-base: 0x60008950, data-base: 0x6072A000

cisco 7206VXR (NPE400) processor (revision A) with 245760K/16384K bytes

of memory.

Processor board ID 26789518

R7000 CPU at 350Mhz, Implementation 39, Rev 3.3, 256KB L2, 4096KB L3

Cache

6 slot VXR midplane, Version 2.6

Last reset from power-on

Bridging software.

X.25 software, Version 3.0.0.

1 Ethernet/IEEE 802.3 interface(s)

1 Gigabit Ethernet/IEEE 802.3 interface(s)

4 Serial network interface(s)

125K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).

46976K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).

8192K bytes of Flash internal SIMM (Sector size 256K).

Invalid device id

Thanks a lot

6 REPLIES
New Member

Re: boot pb on 7206 VXR

I only see a format error in this case. Reformat and try again

New Member

Re: boot pb on 7206 VXR

I am getting the same error, a reformat of the compact flash does not fix, any other ideas...?

New Member

Re: boot pb on 7206 VXR

Hi,

Did you test with boot system flash disk0:c7200-js-mz.122-8.T5.bin command ?

regards,

Carlos

New Member

Re: boot pb on 7206 VXR

Yes i did, it will only boot the boot helper image

New Member

Re: boot pb on 7206 VXR

Hi,

verify the config-reg, show version command, must be 0x2102 or 0x102.

regards,

Carlos

Silver

Re: boot pb on 7206 VXR

do a verify disk0:c7200-kboot-mz.122-8.T5.bin . I think the image may be corrupted.

254
Views
0
Helpful
6
Replies