booting config file from TFTP

[Kevin Melton]

I work for a customer who has a switched Infrastructure including the following switches, 4006, 3500 XL, 2950 series.

I want to put a statement in each one that will allow it to access TFTP server to pull a config file to use if in fact it cannot boot from its own Flash...

is this possible??

[lgijssel]

You can do this with the - service config - command.

Please check the enclosed URL.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/fun_r/frprt2/frd2002.htm#1017708

Regards,

Leo