We use bridge groups on our 3600 series routers for DSL customers requiring /30's or /29's of public IP space. The last two interfaces I setup displayed strange behaviour. This is the config....( addresses changed)
#bridge 9 protocol ieee
#bridge 9 route ip
#int bvi9
#ip address 192.168.1.17 255.255.255.252
#no ip directed-broadcast
#interface atm1/0.133 point-to-point
#description : VPI/VCI 1/133, Customer, bridged
#no ip directed-broadcast
#atm pvc 133 1 133 aal5snap
#bridge-group 9
With this config the .17 address becomes unusable. When I ping it I get a response from the router, not the user. This is new behaviour.
Version 12.0(7)T2
Any help would be greatly appreciated.
Mitchel
