12-02-2002 06:15 AM - edited 03-02-2019 03:17 AM
I have 2 Cisco 7200 that are connected via 1 PVC ATM.
On each sides I have 2 ethernet that are on different VLAN, eth1/0 on VLAN 1 e eth2/0 on vlan 2.
I wolud like to bridge vlan 1 wtih vlan 1 on the other sides and vlan 2 with vlan 2 on the other sides.
Is there a ways to configure 1 ATM pvc on two different bridge-group?
12-02-2002 06:34 AM
Unfortunately, one PVC can only be linked to one bridge-group. In this case, either you go for 2 PVCs between the 2 routers and assign each to a different bridge-group or you change your design to route between the 2 7200 over the ATM PVC instead of bridging.
12-02-2002 07:08 AM
My TLC provider want much money to configure another PVC on the ATM connections... So I will study something to route the vlan.
Thank you very much.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: