Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bridging with 1720 over T1 does not work

I have two 1720 both with WIC-1T configured for bridging only. I think the configuration is okay and even the interfaces (e0 and s0) are up no traffic is running. The sh int s0 output shows no received packets. Because other bridges were installed and working before I assume the link is well. What can I do solve the task?

  • Other Network Infrastructure Subjects
2 REPLIES
New Member

Re: Bridging with 1720 over T1 does not work

Heres some reference material.

http://www.cisco.com/warp/customer/701/37.html

New Member

Re: Bridging with 1720 over T1 does not work

Did you check if the interfaces were in forwarding mode? or are they blocking? you need to check in which mode are the interfaces.. (i.e. spanning-tree)

81
Views
0
Helpful
2
Replies