Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Broad cast control on LAN ????

Hi

I have to diffrent network in my LAN one whisch using private ip and the other is of real ip network.

I have two Vlan on C2950 from this i am connecting internet for these to 2 VLAN(2 network).

i have seen alot of broadcast on my Internet link ,,, genetrated bu these two VLAN...

how can i control there unwanted broadcast on C2950 ,,,, ,,, our LAN ver slow due to the Broadcast.... ,,,

thanks

1 REPLY
Silver

Re: Broad cast control on LAN ????

You can use the storm-control feature on the C2950 to trace the source of the broacasts and optionally close the affected port(s).

If your LAN performance is affected by these broadcasts, I suggest you solve the problem at the source rather than on the switch.

Please refer to the following document:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swtrafc.htm#wp1063295

HTH

--Leon

* Please rate ALL posts.

96
Views
0
Helpful
1
Replies