Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Broadcast in Frame-relay

Hi,

We have a small network with Cisco routers with a HQ and seven branches.

Now, we have changed from dedicated leased lines to frame-relay.

Our configuration is: seven subinterfaces in point-to-point on the core router and related config in the branch side. The default inverse Arp is in place (no map is configured)

Everything is ok, but as use Rip v2, and frame-relay, by default, does not run broadcasts, we are not receiving the annoucements of rip.

I circumvent this with static routes, but I would like to avoid this, using rip default.

How could I configure frame-relay to allow broadcast amongst the interfaces linked to the cloud?

Thanks,

Paulo Prista

2 REPLIES
Bronze

Re: Broadcast in Frame-relay

You could use the rip neighbor command:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr_c/ipcprt2/1cfrip.htm

Also watch for split horizon issues. More info at the above URL

Gold

Re: Broadcast in Frame-relay

You could make the frame circuit broadcast using the broadcast keyword on the frame interfce ldci command, if this is a multipoint interface.

Russ.W

84
Views
0
Helpful
2
Replies
CreatePlease to create content