Very strange thing happening as I see. This bug is in state closed (!!!) So that simply meant that all unnecessary non-RPF traffic on my routers will remain, and I will have high load due to what? What about another IGMP - mroute related question? When router assumes that he must forward traffic to all(!!!) multicast enabled interfaces! That meant adding 5 Mbit/s as the source and having 10 interfaces you will have 5*10=50 Mbit//s (!!!!!!!) unnecessarry load!
CSCdr74908 + ip mroute bug which is not yet even answered by cisco+ 5 Mbits more traffic, which can be generated by trading software, and I will have 70% load!!!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...