10-30-2002 08:59 AM - edited 03-02-2019 02:30 AM
Hi,
I have a 2620, running Framerelay + ISDN running IOS version 12.1(4).
I am continously getting the following message on the console every 2 seconds.
.Oct 30 10:34:52: No element in free_mon_tx_q
.Oct 30 10:34:52: -Traceback= 800AFD30 800B13E0 800B07E8 8030E9E0 8030EDC4 80311EE4 802E2B5C 80305734 80305734 802E2C1C 803444B0 80344490 80347D18 802568DC 802E7514 802E3FB0
Already have opened a case with Cisco TAC. TAC suggested this relates to a bug which appears in 12.2(2) T
Bug id is CSCdx17511
This bug was first found in 12.2(2)T, 12.1(5)T12 these IOS versions. ALso Bug tool kit doesnt show anything about the other affected versions.
What are your suggestions, on this, Do I need to upgrade the IOS ??
ANy thoughts as to why this particular message is shown by the router ??
10-30-2002 05:19 PM
As per TACs advice, i upgraded the IOS to a 12.2(12a)....I think i wont be able to go beyond this....Still getting the same error, continously every 2 seconds. Its kinda hard to believe, that the problem is due to an IOS bug.....
The feature set used is IP Plus.
11-06-2002 01:33 PM
Any body has any inputs on this issue??
11-10-2002 04:20 PM
Whoops, forgot to scroll down for the replies. If you're still getting it with 12.2.12a, it might be either a configuration issue, or hardware.
Chuck
11-10-2002 04:17 PM
Try a later 12.1 release, something that's GD, 12.1.17 for instance. Good luck.
Chuck
11-10-2002 09:26 PM
Hi Chuck,
Thanks for the information. I will try upgrading to a GD release.
Regarding your previous reply, with configuration/hardware issue, I cannot believe, it could be a configuration issue, because, we have over 1000 other sites with the same router model (except for the IOS) with same configuration. The only other option would be a harware issue.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: