Hi, I need to bundle 2 e1's into a virtual link....I have successfully done this but when I add a secondary ip address on the loopback interface I can't ping the secondary address. sample config from 1 router....the other router is configured the same. I am aslo not getting any ipx routes on the remote router.
On this particular connection I also need to add some summerization statements. Any help or direction to related docs would be welcom.
ip subnet-zero
ip name-server 172.21.0.240
multilink virtual-template 1
ipx routing 00e0.b0e2.4251
clock timezone gmt 0
clock summer-time gtm recurring
!
!
!
interface Loopback0
ip address 12.2.2.1 255.255.255.252 secondary
ip address 172.21.39.193 255.255.255.252
no ip directed-broadcast
ipx network 2002ABCD
!
interface Ethernet0
ip address 172.21.39.125 255.255.255.192
ip helper-address 172.21.0.240
no ip directed-broadcast
media-type 10BaseT
ipx network 200244E7
ipx output-gns-filter 1099
!
interface Ethernet1
description SIMBA Test LAN Segment 10.200.18.0
no ip address
no ip directed-broadcast
media-type 10BaseT
!
interface Virtual-Template1
ip unnumbered Loopback0
no ip directed-broadcast
ipx ppp-client Loopback0
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation ppp
load-interval 30
no fair-queue
clockrate 2000000
ppp multilink
!
interface Serial1
no ip address
no ip directed-broadcast
encapsulation ppp
no fair-queue
clockrate 2000000
ppp multilink
!
