Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

By the second power on, the Cisco ubr7223 fails to establish terminal PC connection via the console port ?

At the first time, i have access terminal configuration with the corresponding parameters. We turn off the CMTS Router and when we power on, the connection failed ? What can be the reasons ?

1 REPLY
Anonymous
N/A

Re: By the second power on, the Cisco ubr7223 fails to establish

Recommend you verify CMTS has

configuration register set to

0x2102, that in your config under

the "line con 0" you have no funny

parameters, and that your terminal

emulator is set for 9600 baud,

8 databits no parity, 1 stop bit.

The only time when you should see

the console function then stop is

when you are using a UBR cable

modem configured with a DOCSIS file

configured with Cisco proprietary

extensions to download the IOS

configuration file, where it will

disable the console as a "feature."

If you are using hyperterm, you may

also want to try quitting the program and starting it again ...

there are some hyperterm bugs and

that program can hang.

118
Views
0
Helpful
1
Replies
CreatePlease to create content