Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

c3640 Upgrade problem ***Help***

I have to upgrade some c3640's. The flash has the new and old image on the flash

old: c3640-is-mz.120-22.bin

new: c3640-is-mz.120-27.bin

The c3640 will not reload to new image at reload after issueing the command in global config

(config)#no boot system flash:c3640-is-mz.120-22.bin

(config)#boot system flash:c3640-is-mz.120-27.bin

#copy run sta

#reload

if i run the command

#sho boot

^

% Invalid input detected at '^' marker.

So any idea ?

Please note that i have followed the cisco software upgrade documentation............. and i have upgraded this same routers b/4

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: c3640 Upgrade problem ***Help***

you are missing the colon between flash and c3600

needs to be

boot system flash:c3640-is-mz.120-27.bin

I ran in to this the other day I had to remove and renter it a few times in order for it to take .

4 REPLIES
Silver

Re: c3640 Upgrade problem ***Help***

can you paste in a sh flash

New Member

Re: c3640 Upgrade problem ***Help***

sho flash:

System flash directory:

File Length Name/status

1 5447876 c3640-is-mz.120-22.bin

2 5450324 c3640-is-mz.120-27.bin

[10898328 bytes used, 5878888 available, 16777216 total]

16384K bytes of processor board System flash (Read/Write)

under sho run i can see this:

!

boot system flash c3640-is-mz.120-27.bin

!

but when i do sho ver this is waht i see:

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(22), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Mon 01-Apr-02 21:11 by srani

Image text-base: 0x60008918, data-base: 0x609A8000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f

c1)

New Member

Re: c3640 Upgrade problem ***Help***

sho flash:

System flash directory:

File Length Name/status

1 5447876 c3640-is-mz.120-22.bin

2 5450324 c3640-is-mz.120-27.bin

[10898328 bytes used, 5878888 available, 16777216 total]

16384K bytes of processor board System flash (Read/Write)

under sho run i can see this:

!

boot system flash c3640-is-mz.120-27.bin

!

but when i do sho ver this is waht i see:

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(22), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Mon 01-Apr-02 21:11 by srani

Image text-base: 0x60008918, data-base: 0x609A8000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f

c1)

Silver

Re: c3640 Upgrade problem ***Help***

you are missing the colon between flash and c3600

needs to be

boot system flash:c3640-is-mz.120-27.bin

I ran in to this the other day I had to remove and renter it a few times in order for it to take .

125
Views
0
Helpful
4
Replies