Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C4507R Old WS-X4515 will not come on line - any idea's?

Hi,

We have bought a new C4507R to replace our 4506.

We have taken our 2 Year Old WS-X4515 from the 4506 and put it in the 4507 but it doesn't work. No LED's come on and the console port is dead.

We purchased a new WS-X4515 with the 4507 chassis and that works fine. If I install the new X4515 in slot 1 and the old in slot 2 and do a show module it show a supervisor in slot 2 but not the type and the MAC address is unknown.

Does anyone know if there are problem with older revison WS-X4515's working in a 4507 Chassis?

Thanks,

Chris

2 REPLIES
Silver

Re: C4507R Old WS-X4515 will not come on line - any idea's?

WS-X4515 should have no problem working in a 4507R chassis. Could you please make sure that the SDRAM is securely sitting in its slot ? Sometimes , we have observed in the field that loose SDRAM ( could happen due to handling ) may render the supervisor dead. Let us know if that helps . If that does not help , you may have a dead sup ? Did this same sup work in another chassis ?

Thanks

Purple

Re: C4507R Old WS-X4515 will not come on line - any idea's?

Try putting it in slot 1 without a redundant sup and see if it works .

207
Views
0
Helpful
2
Replies