Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

C836 does not allow "reload at"

Hi one of our C836 does not allow a

C836#reload at 20:00

No bootable image in flash. Load an image into flash and try again; eg. using "copy tftp://<server>/<file> flash:"

Reload to ROM disallowed from a telnet line. Reload cancelled.

though a image is in flash:

Cisco836#dir

Directory of flash:/

1 -rw- 7223364 Feb 29 2004 21:27:05 +01:00

836-k9o3s8y6-mz.123-4.T3.bin

You can also see that the box booted from this image

------------------ show version ------------------

Cisco IOS Software, C836 Software (C836-K9O3S8Y6-M), Version 12.3(4)T3, RELEASE

SOFTWARE (fc3)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2004 by Cisco Systems, Inc.

Compiled Tue 10-Feb-04 04:51 by eaarmas

ROM: System Bootstrap, Version 12.2(11r)YV, RELEASE SOFTWARE (fc1)

<removed> uptime is 5 days, 14 hours, 33 minutes

System returned to ROM by reload at 18:06:44 GMT+1 Thu Mar 11 2004

System restarted at 18:08:12 GMT+1 Thu Mar 11 2004

System image file is "flash:c836-k9o3s8y6-mz.123-4.T3.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco C836 (MPC857T) processor (revision 0x200) with 31130K/1638K bytes of memor

y.

Processor board ID AMB07270N6F (4181847588), with hardware revision 0000

CPU rev number 7

1 Ethernet interface

1 ISDN Basic Rate interface

1 ATM interface

128K bytes of NVRAM.

12288K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

Any idea about the reason ??

On 801 or 803-routers I had always seen a TinyRom-image in the flash, I do not so on the 836. does this box also need this TinyRom ??

Thanks

Hubert

1 REPLY
Bronze

Re: C836 does not allow "reload at"

You may need to add a boot system statement in order to reload via telnet. The global config command is

boot system flash flash:c836-k9o3s8y6-mz.123-4.T3.bin

Make sure that's the only boot system statement.

Then write mem and try the "reload at" again.

209
Views
0
Helpful
1
Replies
CreatePlease to create content