Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Callmanger or Radius server

I have the following connection

Machine A ------7200(gatekeeper)----AS5300--

The other AS5300(RAS) connect to 7200(gatekeeper).

If I want machine A provides security and call detail function,

which is a good, right and cost effective solution.

Machine A should include: 1 or 2 or 3.

1. Use callmanager and Media convergence server.

2. Use radius server with Belle, GRIC, prototal, CTI or solect

3. none of the above.

I amd confuesd about how to decide. Please help me.

Thanks!

Lawrence

1 REPLY

Re: Callmanger or Radius server

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources at the online http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

120
Views
0
Helpful
1
Replies
CreatePlease to create content