Can Cisco Works LMS operate on a server with 2 NIC's?
We are using CWLMS v2.0 and want to know if this product can be used in the following set-up:
i) CWLMS will be installed on a server that will have 2 NIC cards- one NIC will be used for serving Administrator Access and the other one will be used for gathering information and in managing the network.
ii) If we have only 1 administrator accessing the server at any time...will the application run with 512Mb RAM?
* The number of Cisco devices to be managed is 50.
Re: Can Cisco Works LMS operate on a server with 2 NIC's?
To run ciscoworks on a multi-homed machine, there are two requirements. First, all IP addresses must be configured in DNS. Second, because of restrictions with CORBA, only one IP address can be used by the client/browser to access the server. You must select one IP address as the external address, with which the client will login to the CiscoWorks2000 server.
To select an IP address, modify the gatekeeper file located in opt/CSCOpx/lib/vbroker/gatekeeper.cfg. Replace every instance of "" with the external IP address you choose, and remove the "#" character, from the following:
After modifying the gatekeeper file, restart the Daemon Manager by entering /etc/init.d/dmgtd start.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...