Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

can I connect a catalyst 1900 switch to 10base t hub

can I connect a catalyst 1900 switch to 10base t hub?

1 REPLY
Anonymous
N/A

Re: can I connect a catalyst 1900 switch to 10base t hub

The ports on c1900 are auto sensing 10/100,

so they would automatically map to the supported

speed and duplex of the connected device.

The options to watch are.

If using a hub with uplink port, use a straight

cable from the hub's uplink to switch port

and press the MDX button on the hub to cross

the cable at the hub side.

(2) If you using normal port between the hub

and the c1900 switch port, then you'll have to

use a cross cable for connection between them.

89
Views
0
Helpful
1
Replies