Re: Can I connect several Ethernet Bridge Groups together across
I wonder if an MPLS label would do the trick...
If both routers support MPLS then each bridge group's traffic could be identified by a unique label over the frame PVC. Once arriving at the destination router the label is pop'ed and the traffic forwarded to an associated Ethernet interface for example.
... or, certain Frame-Relay aware csu/dsu's also support embedded DLCI's within the Q.933 frame. This is used for PVC management, without paying for additional management pvc's, but could also distinguish between your bridge groups. The problem there will be interface availability on the csu/dsu since these are not generally handling muxing chores. I'm not sure if anyone makes a csu/dsu product that would meet your needs.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...