Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can I create a subinterface on this device?

I have a MSFC-2 card in my CAT6513. We have multiple IP subnets on the same wire, but are NOT yet ready to move to VLAN. All ports are in VLAN500. Can I create subinterfaces on VLAN500, for each of my 7 class-C subnets?

-Alex

1 REPLY
Cisco Employee

Re: Can I create a subinterface on this device?

Subinterface is not possible on this switch and there is no need to. If you trying to create subinterface, means either you want to do trunking or put it in the subnet within the same vlan. If you doing trunking then create interface vlan for each vlan or if you want to put thing under same vlan then putting the ip address as secondary should work fine.

Hope this helps

81
Views
0
Helpful
1
Replies