Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

can't communicate with console

hi, I try to get access to the console of 2620 with out success, Can I access the configution thru ethernet 0 on thru IP.

thank you

3 REPLIES
Cisco Employee

Re: can't communicate with console

Make sure to use the correct cable and hyperterminal setting on a pc as 9600,8,N,1. If it still doesn't work, you may have a dead console port.

Bronze

Re: can't communicate with console

do a "sho run" and scroll down to "line con 0". Make sure that everything looks normal. Check especially for "speed" commands. Also, do you get anything on the console if you power-cycle the router? Does that console cable work on other routers?

New Member

Re: can't communicate with console

I had this problem once, and I had to use the jumpers on the mother board to reset the routers console interface to 9600. Here is the link that explains how to do this. http://www.cisco.com/warp/public/701/59.html

110
Views
0
Helpful
3
Replies