Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

can't ping the internet

Hello,

I started a post earlier but after working on the problem some more, I realized that I was barking up the wrong tree.

I figured out how to add DGW and DNS addresses to my config but, telling my router where the DNS servers are does me no good if I can not even ping them.

Here is my config...

"Current configuration : 1440 bytes

!

version 12.2

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

!

hostname 1605r

!

enable secret

!

ip subnet-zero

no ip source-route

ip name-server 64.81.45.2

ip name-server 216.231.41.2

!

no ip bootp server

!

!

!

!

interface Ethernet0

ip address 64.xxx.xxx.xxx 255.255.255.0

no ip proxy-arp

ip nat outside

no cdp enable

!

interface Ethernet1

ip address 192.168.1.1 255.255.255.0

no ip proxy-arp

ip nat inside

no cdp enable

!

ip default-gateway 64.xxx.xxx.xxx

ip nat inside source list 1 interface Ethernet0 overload

no ip classless

ip route 0.0.0.0 0.0.0.0 Ethernet0

no ip http server

!

access-list 1 permit 192.168.1.0 0.0.0.255

no cdp run

banner login ^C

WARNING!!!

This system is soley for the use of authorized users for official purposes.

You have no expectation of privacy in its use and to ensure that the system

is functioning properly, individuals using this computer system are subject

to having all of their activities monitored and recorded by system

personnel. Use of this system evidences an express consent to such

monitoring and agreement that if such monitoring reveals evidence of

possible abuse or criminal activity, system personnel may provide the

results of such monitoring to appropriate officials.

^C

!

line con 0

password

login

line vty 0 4

exec-timeout 0 1

no login

no exec

transport input none

!

end"

Now, this config worked perfectly on my cable modem where my isp assigned my ip address for int e0 dynamically. Now I have a new isp that has static addressing and I can't get it to work?!?!?

I entered the ip address and netmask on e0 and I can ping my DGW but I can not ping my dns servers. If i hook up a pc to my dsl modem instead of my router, I can surf fine.

Anyone know what I am missing?

Thanks, Chris

2 REPLIES

Re: can't ping the internet

Chris,

Try enabling "ip classless"

New Member

Re: can't ping the internet

you may also try "ip route 0.0.0.0 0.0.0.0 Ethernet0 64.x.x.x (next hop address)

instead of just ip route 0.0.0.0 0.0.0.0 Ethernet0

87
Views
15
Helpful
2
Replies