cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
292
Views
0
Helpful
5
Replies

Can't Set Time on Catalyst 5000

j.kernan
Level 1
Level 1

Have a Cat 5K that keeps rebooting inexplicably. While working that issue, I tried to look at the logs and can't get a reboot time. Cleared and Disabled all NTP settings. Tried to manually set date and time and all I get is 0 2000 00:00:00 . Not sure why. Thanks

5 Replies 5

Prashanth Krishnappa
Cisco Employee
Cisco Employee

What software version are you running on this switch. Look at the following bug

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdp36947

4.5

which maintenance release in 4.5? 4.5(9) and later have fix for the above bug. 4.5(13a) should be good code to run in 4.5(x)

4.5(1) We made a sweep and upgraded the whole LAN a few months back. I'm not sure why this wasn't included. Thank you for your help. Does 13a only run on a SUP 3 or is the image small enough for a SUP 2? Thanks again.

We have 4.5(13a) for Sup1/2 as well. It's the last file in the following page

http://www.cisco.com/cgi-bin/tablebuild.pl/cat5000-sup

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: