Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can't upload IOS to FLash of Cisco Catalyst 2900 XL

Hi Guys...

We have a switch Cisco Catalyst 2900 Series XL Model WS-C2924-XL-EN. 8 MB DRAM 4 MB FLASH

I already tried the discussions regarding flash_init dir_flash: boot and the likes.

By the way, I already downloaded the IOS for our switch through Cisco Website. Settings are default through Hyper Terminal

Here's the thing:

Whenever I transfer the .bin file using XMODEM, it prompted an error "Transfer cancelled by remote computer"

Kindly refer to the attachment for the screenshot.

It would be great if you can help me guys. =)

Thanks!

3 REPLIES
Silver

Can't upload IOS to FLash of Cisco Catalyst 2900 XL

Do you have ability to transfer image via TFTP, it would be much quicker.

For Xmodem transfer check that both switch and PC using the same setting as speed, error correction,etc

---

Posted by WebUser Aleksandr Yanovskiy

New Member

Re: Can't upload IOS to FLash of Cisco Catalyst 2900 XL

so you suggest that i'll use TFTP Server to upload IOS to our switch?

Definitely, I will do that if XMODEM can't be fix.

Can you please give me a reliable Free TFTP Server?

....

Silver

Can't upload IOS to FLash of Cisco Catalyst 2900 XL

http://www.tftp-server.com/ You can use this for MS platform. One time I have no responsibility lo load image by TFTP, I loaded image 30 minutes, by tftp it takes near 5 minutes.

When you choose speed of Xterm, for exmaole 9600, its 9600bits per second. So you can calculate time you need to load image

---

Posted by WebUser Aleksandr Yanovskiy

---

Posted by WebUser Aleksandr Yanovskiy

1254
Views
0
Helpful
3
Replies