Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Can we create ether-channel

HI

Can we create ether channel in this scenario.

for eg Switch1 in the ground floor and two switches on the first floor the two switches on the first floor are cascaded and from the ground floor switch two links are going to the two switches.

Thanks

Mahmood

4 REPLIES

Re: Can we create ether-channel

Hi Mahmood,

You can create an EtherChannel on a standalone switch, on a single switch in the stack, or on multiple switches in the stack (known as cross-stack EtherChannel).

See Figure 33-2 and Figure 33-3 in the below mentioned link

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12220se/3750scg/swethchl.htm#wp1116631

HTH, if yes please rate the post

Ankur

Re: Can we create ether-channel

hi

thanks Ankur

so u mean to say that we can create ether-channel on using one port on one switch and another on second switch but the switches should be stacked i am right.

Thanks

Mahmood

Re: Can we create ether-channel

Hi Mahmood,

Yes you are absolutely right!!

HTH, if yes please rate the post.

Ankur

New Member

Re: Can we create ether-channel

I did it before but the two switches were in a stack.

157
Views
3
Helpful
4
Replies
CreatePlease to create content