Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Can WS-C2950C-24 be interfaced to 8BASE100FX Module in IBM 8275-322 Switch

Hi,

My customer has an IBM 8275-322 Switch with a 8BASE100FX Module.

He wants to purchase two Cisco switches which need be interfaced to above.

I wish to know if the two fiber uplinks [100BASEFX] of WS-C2950C-24 are compatible with ports of 8BASE100FX of 8275-322. If not kindly suggest an alternate Cisco Switch that work with IBM 8275-322.

Appreciate your comments/advise on above. Thank you.

Ravinda - ravindam@sg.ibm.com

1 REPLY
Silver

Re: Can WS-C2950C-24 be interfaced to 8BASE100FX Module in IBM 8

Ravinda,

As long as the IBM 8275-322 follows the IEEE 802 spec you'll be fine, which I assume it does. The 2950C-24 will work for your customer due to it's port configuration (24 10/100 ports and two fixed 100BASE-FX uplink ports )

Hope this helps you,

Don

102
Views
0
Helpful
1
Replies
CreatePlease to create content