Can you implement URT on Catalyst switches, when connecting the workstation via a Cisco VOIP phone?
Is it possible to use the Cisco IP 7960 phones as VOIP solution, but rolling out URT across our Catalyst 6509 and 3524 switches. If the PC connects through the switch integrated into the phone, will it still collect its correct VLAN dynamically via URT?
Does the IP phone still connect into its correct VLAN?
Re: Can you implement URT on Catalyst switches, when connecting
Q. Does URT 2.0 work with Cisco VoIP phones?
A. Yes. Cisco VoIP phones are configured in an auxiliary VLAN through the switch command-line interface (CLI). URT continues to function unhampered. Catalyst
6000 support has been built into the handshake between the phone and the switch as part of the Cisco Discovery Protocol (CDP) phone identity process to configure an 802.1Q port. The Catalyst 6000 will require a software upgrade to be released in January 2001 to support a host and a Cisco IP phone on the same port. It makes no difference to URT if the host is connected directly to a switch port or to a Cisco IP phone data port.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.