09-11-2002 08:45 AM - edited 03-02-2019 01:17 AM
I recently noticed the configuration register setting for one of my 3660 routers is 0x3922 and I am unable to change it using the config-register command. Among other things, this setting equates to a console port speed of 115200 which I learned through trial and error.
Can anyone offer a tip or information as why I am unable to change this?
Thanks in advance.
09-11-2002 09:02 AM
I assume by you saying you can't change it config-register 0x2102 didn't work.
To change speed and confreg reboot into rommon by pressing break sequence (http://www.cisco.com/warp/public/701/61.html) and follow these instructions:
http://www.cisco.com/warp/public/701/59.html
Hope that helps
Steve
09-11-2002 09:05 AM
You are correct Steve. I cannot change it using config-register 0x2102. I will try your suggestion as soon as I can get the downtime.
Thanks for the response.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide