Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CAR RATE-LIMIT

Hi.

I'm trying to limit my output connection over a serial wan card at max 64 kbit/s.

I inserted this acl

access-list 100 perit ip any any

and on serial interface

rate-limit output access-group 100 64000 8000 8000 conform-action transmit exceeded-action drop.

When i try to download a file from a locatin connected with my serial link, i reach 200-300 kbit/s.

Why this?

How i can set my

bit rate, normal burst bytes, maximum burst bytes to limit the all the connections to 64 kbit/s?

If i connect another network over a fast ethernet card, i must change parameters in bit/s configuration?

Thanks.

Best Regards.

  • Other Network Infrastructure Subjects
4 REPLIES
New Member

Re: CAR RATE-LIMIT

I assume you tested this from the other end of the serial link where the access list is? So I ask are you using CEF (Cisco Express Forwarding) on this interface? You must.

New Member

Re: CAR RATE-LIMIT

Yes, i tested the connection on the other end of the link over serial and ethernet.

In the first moment the connection was limited by 20-30 kb, but it increase until 200-300 kb/s.

I want only 6,4 kb/s for this connection!

I do not use CEF express forwarding, some documentation about CAR limit,

does non explain to enable CEF ....

Why this?

Many Thanks.

New Member

Re: CAR RATE-LIMIT

Don't know why its not it some of the documentation. Everything I ever read says CEF is required for CAR.

New Member

Re: CAR RATE-LIMIT

In effect some documentation about CAR, say that using CAR & DCAR with

only output rate-limit, you must be enable CEF on the interface.

I enabled CEF glibally with ip cef but nothing changed.

Perhaps using output + input CAR limit, with 64000 8000 8000 it work correclty.

It's strange ........

84
Views
0
Helpful
4
Replies
This widget could not be displayed.