Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cascading two cisco 1760 access routers...HELP

hi all,

recently, i was successful in configuring link bundling to aggregate two E1 links to form one 4Mbps WAN pipe on 1760 access router. now i need to configure another router in the same way and cascade them together to get an 8Mbps link. i tried using Multichassis MLPPP but the router would not accept any SGBP commands. here is what i have so far:

username BOB password 0 BILL

tdm clock E1 0/0 both export line

tdm clock E1 1/0 both import E1 0/0 internal

ip subnet-zero

!

!controller E1 0/0

framing NO-CRC4

channel-group 0 timeslots 1-31

!

controller E1 1/0

framing NO-CRC4

channel-group 0 timeslots 1-31

!

!

interface Multilink1

ip address x.x.x.x y.y.y.y

ppp multilink

multilink-group 1

!

!

interface Serial0/0:0

no ip address

encapsulation ppp

ppp authentication chap

ppp multilink

multilink-group 1

!

interface Serial1/0:0

no ip address

encapsulation ppp

ppp authentication chap

ppp multilink

multilink-group 1

1 REPLY
Community Member

Re: cascading two cisco 1760 access routers...HELP

Any update on this? Could you share it in forum.

306
Views
0
Helpful
1
Replies
CreatePlease to create content