Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

casnUserId and VDP Bundle

It seems that casnUserId not working on VDP Bundle links. (i.e. it shows empty string instead username). Is there exist some another way to acquire PPP username using oid, depending on Acct-Session-Id?

We need it to manage simultaneous-logins through RADIUS server.

PS: AS5300, firmware c5300-j-mz.122-11.T. GNU radius 0.94.4.


Re: casnUserId and VDP Bundle

I am not sure about the VDP bundle. But, if virtual-access interfaces are being used due to bundling, try using the variable vpdnSessionAttrUserName. The OID for this is .

New Member

Re: casnUserId and VDP Bundle

Sadly, but we have VDP Bundles (simple ppp multilink) not VDPN bundles. So:

CISCO-VPDN-MGMT-MIB::cvpdnTunnelTotal.0 = Gauge32: 0 tunnels

CISCO-VPDN-MGMT-MIB::cvpdnSessionTotal.0 = Gauge32: 0 users

CISCO-VPDN-MGMT-MIB::cvpdnDeniedUsersTotal.0 = Counter32: 0 attempts

And in this time:

Vi18 wQP2dBvEDg Virtual PPP (Bundle) 00:00:38

I think that its an IOS bug, because CISCO-AAA-SESSION MIB must work for any accounted session, independent from its type.

VDP bundles created using:

multilink virtual-template 1

interface Virtual-Template1

ip unnumbered FastEthernet0

no ip route-cache

ip tcp header-compression

no logging event link-status

no peer default ip address

ppp quality 30

ppp max-failure 10

ppp reliable-link

ppp authentication pap

ppp chap refuse

ppp ipcp dns accept

ppp ipcp wins reject

ppp ipcp ignore-map

ppp multilink

ppp timeout idle 3600

CreatePlease login to create content