Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

cwu
New Member

Cat 4000 and SNMP

I am trying to poll my Cat 4006 (WS-C4006) running Cat OS 6.1(2) with SNMP. I have discovered that polling the tables 1.3.6.1.2.1.17.4.3.1.2 (dot1dTpFdbPort) or 1.3.6.1.2.1.17.4.3.1.3 (dot1dTpFdbStatus) in quick succession, in any order, doesn't return any data after the first poll. i.e. it works the first time but successive polls don't return anything (as if the tables don't exist on the device). If you wait 10 seconds between polls data is returned as expected.

Has anyone seen this before?

1 ACCEPTED SOLUTION

Accepted Solutions
Blue

Re: Cat 4000 and SNMP

Since you're on 6.1(2), this sounds like CSCdt36981. Also, for polling objects from the BRIDGE-MIB, you need to be aware of using community string indexing: ftp://ftp.cisco.com/pub/mibs/supportlists/wsc4000/wsc4000-communityIndexing.html

2 REPLIES
Blue

Re: Cat 4000 and SNMP

Since you're on 6.1(2), this sounds like CSCdt36981. Also, for polling objects from the BRIDGE-MIB, you need to be aware of using community string indexing: ftp://ftp.cisco.com/pub/mibs/supportlists/wsc4000/wsc4000-communityIndexing.html

cwu
New Member

Re: Cat 4000 and SNMP

Thanks for the bugID. I'll have a look at it.

82
Views
5
Helpful
2
Replies
CreatePlease login to create content