Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

cat 4006 show error 0 when given ping command

hi

when i give the ping command from my L2, it show the following error.

B_4006_L2> (enable) ping 10.8.51.1

.ping 10.8.51.1: error=0

.ping 10.8.51.1: error=0

.ping 10.8.51.1: error=0

.ping 10.8.51.1: error=0

.ping 10.8.51.1: error=0

.

----10.8.51.1 PING Statistics----

5 packets transmitted, 0 packets received, 100% packet loss

----10.8.71.4 PING Statistics----

5 packets transmitted, 5 packets received, 0% packet loss

round-trip (ms) min/avg/max = 2/6/10

B_4006_L2> (enable) ping 10.8.53.26

.ping 10.8.53.26: error=0

.ping 10.8.53.26: error=0

.ping 10.8.53.26: error=0

.ping 10.8.53.26: error=0

.ping 10.8.53.26: error=0

.

----10.8.53.26 PING Statistics----

5 packets transmitted, 0 packets received, 100% packet loss

can any one explain

thanks

1 REPLY
Cisco Employee

Re: cat 4006 show error 0 when given ping command

This is due to missing default gateway. Configure a default gateway using

set ip route default x.x.x.x

97
Views
5
Helpful
1
Replies
CreatePlease to create content