Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cat 4006 Sup CPU running high

I'm trying to fix a condition where my cat sups CPUs are running 80% and higher all day. I have read that having POE line cards adds to the cpu overhead. Should turning off inlinepower device detection lessen the load on the cpu? id set port inlinepower mod/port off

4 REPLIES

Re: Cat 4006 Sup CPU running high

Hi

These 2 links can be helpful to understand the main reason for the spike in cpu utilisation which can help u out in troubleshooting the same.

You can find out the process which takes out the max of the CPU cycle,once you are done with the findings about the process you can start off proceeding with containing the same.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a0080094956.shtml#highcpu

regds

Cisco Employee

Re: Cat 4006 Sup CPU running high

POE cards should not cause CPU utilization this high. Attach outputs of

sh mod

sh proc cpu | exc 0.0

sh platform health

New Member

Re: Cat 4006 Sup CPU running high

I've attached the output from show proc cpu and show mod. The show platform isn't supported.

Cisco Employee

Re: Cat 4006 Sup CPU running high

You are running into the following bug

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCeh26223

Upgrade your CAT OS to 8.4(10)GLX to get past the above bug and the following bug

http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCsc25783

202
Views
5
Helpful
4
Replies
CreatePlease to create content